User Manual

Master Fader and My Fader Reference Guide
27
Level Setting Procedure – DL32R
(1) Phantom Power — If any connected mics require an extra 48V of power, engage the phantom power.
Each DL32R has individual 48v phantom power buttons on all mic inputs, controlled via Master Fader.
Phantom power for each channel may be selected by:
(1) tapping that channel’s input routing view.
(2) tapping the 48v button.
Notice that the 48v button illuminates red, indicating that phantom power has been engaged.
Furthermore, notice that the 48v text on each channel’s input routing view is red when phantom power
is engaged and gray when disengaged.
(2) Let There Be Rock — Use your voice, play the instrument, or play the line-level
source at the same volume as it would be during normal use...and keep it going!
(3) Raising Gain and Watching Meters — Now we’ll want to raise the gain until the
input meters bounce between green and yellow, the colors of our beloved hometown
Seattle Supersonics [RIP]...but how? You might have noticed a gain slider conveniently
located to the left of the phantom power button. Yup, that’s your gain, one for each
input channel. Simply drag the channel’s gain slider from left to right while watching
the bouncing meters, making sure it doesn’t get too hot.
(4) The Raising of the Fader, Part I — Raise the channel fader to 0 dB.
(5) Rinse and Repeat — Repeat steps 2-4 for each channel with signal.
DL32R 48v Phantom Power Disengaged DL32R 48v Phantom Power Engaged
Step 3 Step 4