User Manual
Master Fader and My Fader Reference Guide
29
Chapter 5 : Mixer View : Channel Strips
Introduction
The mixer view contains input channel faders, FX channel faders [reverb and delay], sub group
faders, VCA group faders, return faders [DL32 only] and an iPad channel fader [DL1608 / DL806 only].
Most channel strips look and function exactly like the others.
These faders may be seen in both the mixer view and channel view. In the mixer view, all faders
are readily available, while in the channel view it is the current channel’s fader strip that is displayed
along with whatever digital signal processing is taking place for that channel.
The mixer view displays eight channels at a time, as well as the navigation bar and master fader.
Take a look at the image below. It is the rst visual you will see when booting up the Master Fader app
for the rst time.
The Swipe Zone
Here in the mixer view, drag or ick left or right anywhere in the background of the outlined
area [below the mute buttons and above the solo buttons] to view the remaining channel strips.
Let’s look at one of the input channels rst, discussing each of its features top to bottom. We will then
take a look at the remaining channels and go over how and why they’re dierent than the input channels.