User Manual

Master Fader and My Fader Reference Guide
55
Mix Selector – The mixer view shows a fader for each channel. Initially, this fader controls the level to
the LR mix. But how do you control the level going to the aux sends? Or how about the aux master level?
What about the sub groups and VCAs? Simple. Use the mix selector to switch between mixes.
The currently selected mix is illuminated, but changing the selected output is easy. Simply tap the
output selector to reveal a popover displaying all outputs. Tap the desired output and voilà...the master
fader now controls a dierent output. Additionally, you could tap the output selector – and with your nger
still on the mix selector – drag until the desired output is highlighted, then release to select. See the images
below for an example of changing outputs from LR to aux 4.
Once a dierent mix has been selected, the color surrounding the channel faders will change
to show the newly selected output. Similarly, the master fader will display the newly selected mix.
In this case, LR to A4.
Here, the mixer view acts like a window where you may view and change one output’s mix at a time.
No matter which output is currently selected, the others are still there, as they were.