User Manual

Master Fader and My Fader Reference Guide
59
The mixer view should now look something like the image below.
There are a couple of things to notice in the above image:
(1) You should notice that each channel assigned to view group A (channels 1 and 2, return 1-2,
reverb 1 and 2 and delay) are the only visible channels. All others have now “disappeared.”
(2) You should notice that the text of the view group A master (Café) on the selector strip
turns green when enabled.
If the view group “ALL” is illuminated, then you are currently viewing all channels (even if channels have been
assigned to view groups). Any time you wish to view all channels again, tap the “ALL” button from the view
groups masters on the selector strip.
Excellent work! You assigned channels 1, 2, the FX and return 1-2 channels to view group A and engaged view
group A (thereby hiding all other channels). Notice that only channels 1, 2, return 1-2, reverb 1-2, delay, and
the master fader channels are present....the channels you assigned to view!