User Manual

Master Fader and My Fader Reference Guide
63
Balance
When LR is the selected output, the balance slider controls how much of the output signal is sent
to the left versus the right outputs. Touch and drag the slider left or right to make adjustments.
Tapping the master fader’s balance slider twice will center it.
Mute
The master fader mute button works exactly like a channel mute, except it mutes the output.
Use it as a break switch to mute monitors (or even the main PA) when the band takes a break,
for example. The mute button is available when any output is selected.
The mute button illuminates red when engaged and is gray when disengaged.
The user may de-select Use LR Mute for a particular aux/FX send to control the aux mutes
(or FX mutes) and main mix mutes independently for each channel. More information about
Use LR Mute may be found on page 64.
Outputs muted via group mutes will illuminate oxblood red. More information about mute
groups may be found on pages 49-54.
Aux/FX Send Conguration Menu
When the selected output is anything other than LR or subs, the balance control is replaced with a button
displaying settings for that aux or FX send. Here is where the source for each aux and FX send may be
congured as Pre DSP, Pre Fader or Post Fader. Simply tap the button to display the conguration menu.
Now tap which setting you prefer:
Pre DSP — Pre DSP is ideal when using the auxes for monitor mixes and you want compression and other
eects in the main mix, but not the monitors. Pre DSP is available in all auxes, but not the FX.
Pre Fader — Like Pre DSP, Pre Fader is also ideal when using the auxes for monitor mixes,
but unlike Pre DSP, Pre Fader adds gate, compression and EQ to both the main mix and
the monitors. The level is not aected by the setting of the associated channel fader. Pre Fader
is available in all outputs, including FX. Pre Fader is the default setting for the aux sends.
Post Fader — Post Fader is for external and internal FX; the Post Fader level is aected by the channel DSP
and the setting of the associated channel fader. Sends connected this way are also useful for recording
sends. Post Fader is available in all outputs, including FX. Post Fader is the default setting for the FX sends.
Unlinked (Mono) Aux Linked (Stereo) Aux FX Output