User Manual
Master Fader and My Fader Reference Guide
74
Conguring The Matrix
You have waited long enough...time for some step-by-step directions and screen shots of what we’re
talking about!
• Step 1 — Matrix outputs are assigned via the I/O patch.
There is a plethora of information about the I/O patch on pages 164-175, but the idea here
is that matrix outputs are assigned via the output tabs on the I/O patch. If you need to
review that section rst, we’ll wait.
In this example, aux sends 1-8 are assigned to XLR outputs 1-8, the main L/R is assigned to XLR
outputs 13-14 and matrix 1-4 are assigned to the remaining XLR outputs [9-12]. Set up the main
L/R and aux sends as you normally would. We’re here to set the matrix up!
There IS one additional thing we can set up while the I/O patch is still open: talkback. Tap the talkback
tab and swipe left. Assign talkback to matrix 1-4.
With talkback set up, the house manager can now make an announcement for the audience to return
to their seats for the next portion of the show. This announcement will be sent to matrix 1 (lobby),
matrix 2 (mezzanine), matrix 3 (bathrooms) and matrix 4 (backstage), but not in the main L/R
(auditorium).
We’re o to a fantastic start! Now we’ll need to set up names, levels, DSP, etc. for each matrix.