User Manual
Master Fader and My Fader Reference Guide
94
Gate On / O
Press the Gate button to turn the gate on or o. It will illuminate green when engaged and is gray when
disengaged. Notice the input and output meters below, as well. There is mono metering for inputs and
outputs on unlinked channels and stereo metering for inputs and outputs on linked channels.
GATE ON / MONO METERS GATE OFF / STEREO METERS
Modern / Vintage
The modern/vintage button is located directly to the right of the gate on/o button. It displays the gate type
currently in use, with “Modern” as the default gate. Tap this button to reveal the two gate types, then tap the
gate you would like for the selected channel. The controls will change to reect the gate type chosen.
You can switch between gate and compressor types while audio passes and the settings will
match as closely as possible, but the sound will change.
Presets
Presets save parameters and may be recalled as needed. The mixer comes with a library of factory presets.
There are also user presets. These may be created for each preset type. The number of user presets available
is limited only by the available space on the iPad.
An entire chapter is dedicated to presets. This includes detailed instructions and multiple screenshots every
step of the way. Please check it out on pages 136-143.
Import / Export — Master Fader aords you the opportunity to import and export gate presets via iTunes,
Dropbox and/or Email. An entire chapter is dedicated to importing and exporting les. This includes detailed
instructions and multiple screenshots every step of the way. Please check it out on pages 211-218.