User Manual
Master Fader and My Fader Reference Guide
95
Compressor On / O
Press the Comp button to turn the compressor on or o. It will illuminate green when engaged and is gray
when disengaged. Notice the input and output meters below, as well. There is mono metering for inputs and
outputs on unlinked channels and stereo metering for inputs and outputs on linked channels.
COMPRESSOR ON / MONO METERS COMPRESSOR OFF / STEREO METERS
Modern / Vintage
The modern/vintage button is located directly to the right of the comp on/o button. It displays the
compressor type currently in use, with “Modern” as the default compressor. Tap this button to reveal the
two compressor types, then tap the compressor you would like for the selected channel. The image will
change to reect the compressor type chosen.
Presets
Presets save parameters and may be recalled as needed. The mixer comes with a library of factory presets.
A maximum of 18 factory presets will be displayed at one time. Just scroll up to view the other factory presets,
if available.
There are also user presets. These may be created for each preset type. The number of user presets available
is limited only by the available space on the iPad.
An entire chapter is dedicated to presets. This includes detailed instructions and multiple screenshots every
step of the way. Please check it out on pages 136-143.
Import / Export — Master Fader aords you the opportunity to import and export compressor presets via
iTunes, Dropbox and/or Email. An entire chapter is dedicated to importing and exporting les. This includes
detailed instructions and multiple screenshots every step of the way. Please check it out on pages 211-218.