User Manual

Owner’s Manual
5
Owner’s Manual
Hookup Diagrams
PUSH FOR SETTINGS
MAXOFF
MIX OUTDIRECT OUTDIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE
MIC
U
+50dBOFF
LINE
MIC
+50dBOFF
U
LIVE SHOW
SPEAKER VOICING
SPEECH
CLUB
MON
LIVE
PUSH FOR SETTINGS
SPEAKER CONTROL
MONITOR POSITION
SPEAKER VOICING
MON
SPEECH
LIVE
CLUB
CONFIGURATION
MEMORY 1 2 3 4 5 6
ABOUT
CH2 IN LO-Z HI-Z
LOCK PIN 1 2 3 4
BACKLIGHT
FRONT LED
RESET
OFF DIM ON
OFF ON
PUSH FOR SETTINGS
MAXOFF
MIX OUTDIRECT OUTDIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE
MIC
U
+50dBOFF
LINE
MIC
+50dBOFF
U
DRM loudspeakers are the perfect tool for singer-songwriters touring the local coee shops. Bring your favorite axe
and mic, DRM loudspeakers and cables and power cords.
In this example, a dynamic microphone is connected to the channel  input of a DRM22 loudspeaker, used for monitoring
purposes.
Now grab your axe and plug it directly into the channel 2 input. Or if you use eects, connect the guitar to the eects input
and another cable from the eects output to the channel 2 input.
A DRM25 loudspeaker will be used for the main PA. Simply connect a cable from the DRM22 monitor’s MIX OUT jack
to the DRM25 PA’s channel  input.
For the output, you will want to set a speaker mode, described in detail on page 2. For this type of setup, Live works well
for the main DRM25. Select the Monitor mode for the DRM22 monitor. Additionally, you will want to set the monitor’s
configuration > channel 2 input to Hi-Z to account for the guitar.
Singer-Songwriter Setup