User Manual

Owner’s Manual
9
Owner’s Manual
Large Club System
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
MAXOFF
MIX OUTDIRECT OUTDIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE
MIC
U
+50dBOFF
LINE
MIC
+50dBOFF
U
PUSH FOR SETTINGS
MAXOFF
MIX OUTDIRECT OUTDIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE
MIC
U
+50dBOFF
LINE
MIC
+50dBOFF
U
LIVE SHOW
SPEAKER VOICING
SPEECH
CLUB
MON
LIVE
PUSH FOR SETTINGS
SPEAKER CONTROL
PUSH FOR SETTINGS
SPEAKER CONTROL
MONITOR POSITION
SPEAKER VOICING
MON
SPEECH
LIVE
CLUB
PUSH FOR SETTINGS
SPEAKER CONTROL
SUBWOOFER HPF
DRM SUB
VAROFF
DRM
SUB
Hookup Diagrams continued...
Here’s how to set up a large club system. In this example, the L/R outputs of a DL6S mixer are connected directly
to the CH inputs of a pair of DRM8S subwoofers. The Direct Out of each subwoofer is then connected to the inputs
of an additional pair of DRM8S subwoofers. The X-Over of these subwoofers may be set to DRM Top.
From here, the high-pass outputs of the two outer DRM8S subwoofers are connected directly to the inputs of a set
of DRM35 loudspeakers. The Speaker Modes of these PA loudspeakers may be set to Live (or Club) and the Subwoofer
HPF set to DRM Sub. Talk about beefy low end!
Outputs  and 2 from the mixer may be used as aux sends; these are connected directly to the CH inputs of a pair of DRM22
loudspeakers to be used as monitors for the band. The Speaker Modes of the monitor loudspeakers may be set to Monitor.