Specification Sheet

www.mackie.com
PHONE: [phone] • TOLL-FREE: 800.898.3211
Bluetooth Optimization Guide
Knowledge Base
http://www.mackie.com
The following document includes setup advice, best practices and tips and tricks to get the best
possible Bluetooth connection between your Thump Boosted, Freeplay, Reach, ProDX, or CRBT
monitors and your iOS/Android device.
Common Causes Of Bluetooth Dropouts
Distance: The distance between your Bluetooth
connected devices is a very relevant factor in signal
strength. Depending on the Bluetooth implentation of
both connected devices, the maximum distance is 10
meters (32.8 feet).
Hard Surfaces: In addition to distance, hard
surfaces can block or reduce the range of your
wireless network. Surfaces such as wood, concrete,
metal can block your signal. Having objects such
as walls, speakers, audio/amp racks, furniture and
windows in front of your device will aect the range.
Crowds: If there are large crowds of people in
between your device and Thump Boosted, Freeplay,
CRBT, Reach or ProDX that can cause reduction of
signal strength. Water acts as a blockade for high
frequency radio signals and since the human body
consists of 60% of water, crowds will have an eect
on your signal strength.
Radio Interference: Radio signals from various
consumer electronic products can interfere with
wireless network signals. For example, cordless
phones, wireless routers, garage door openers and
microwave ovens can each take down a Bluetooth
connection when powered on.