CR4BT™ • CR5BT™ Multimedia Monitors w/ Bluetooth® OWNER’S MANUAL
Multimedia Monitors w/ Bluetooth® Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
CR4BT • CR5BT Features Important Safety Instructions............................................................2 • Studio-quality design, sound and performance ideal for multimedia creation and entertainment • Stream music from any smartphone, tablet or other Bluetooth® enabled device • Professional-grade components for optimized sonic performance • 50 watts of clean, articulate stereo sound • Polypropylene-coated woofer • 4" [CR4BT] • 5" [CR5BT] • .
Multimedia Monitors w/ Bluetooth® Introduction Quick Start Creative Reference™ Multimedia Monitors are designed for multimedia creation and entertainment, delivering studio-quality design and performance in affordable designs. We realize that you can’t wait to hook up your CRBT Creative Reference Multimedia Monitors and try them out. Nevertheless, please take the time to read this page NOW, and the rest can wait until you’re good and ready.
CR4BT / CR5BT Owner’s Manual Hookup Diagrams CR4BT / CR5BT The illustration above shows a common use for CRBT Series Multimedia Monitors. Perhaps a friend created a playlist on their smartphone and wants to share it. With great hesitation, you finally oblige. Everyone has that one friend with terrible taste in music. We know, it happens. In this example, a smartphone is connected to the CRBT Series Multimedia Monitors via Bluetooth.
Multimedia Monitors w/ Bluetooth® Hookup Diagrams continued... CR4BT / CR5BT CR4BT / CR5BT The illustration above shows a typical use for CRBT Series Multimedia Monitors. Everyone needs tunes while working, right...or is it just me? In this example, simply connect the cable from the computer’s 1/8" output jack to the L/R RCA inputs of the powered CRBT Series Multimedia Monitor. If you prefer to use 1/4" inputs instead of RCA inputs, that option is available, too.
6 3 3. Signal Inputs Connect the line-level signal from a computer, mixer, or other signal source to one pair of these input jacks. There are two types of input connectors to choose from: 1/4" line-level signals driven by balanced or unbalanced sources or RCA line-level signals driven by unbalanced sources. Since these are connected together electrically, do not connect more than one signal at a time to the input jacks.
Multimedia Monitors w/ Bluetooth® 4. Powered Speaker Position Select Switch Here you get to decide if the powered monitor is to be positioned on the left side (switch up) or right side (switch down) of the desk. One convenience is that it keeps the power cord, front and/or rear panel connections from crossing your work space. Additionally, it doesn’t discriminate between right or left-handed users. Simply set it up to suit your preference. Front Panel Description 7.
Upon powering up the CRBT, the Bluetooth function is either: (1) In sleep mode and the Bluetooth LED is off. See ‘Pairing and Connecting for the first time’ below. (2) Paired and Connected and the Bluetooth LED is on. See ‘Previously Paired and Connected Devices’ below. Pairing Paired and Connecting for the first time: To enter pairing mode, press and hold the Bluetooth button for two seconds. The button LED will illuminate and flash for approximately 30 seconds while in pairing mode.
Multimedia Monitors w/ Bluetooth® Appendix A: Service Information If you think your CRBT Series multimedia monitor has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the Support section of our website (www.mackie.com/support) where you will find lots of useful information such as FAQs and other documentation. You may find the answer to the problem without having to send your CRBTs away.
Owner’s Manual Repair For warranty service, please refer to the warranty information on page 15. Non-warranty service is available at a factoryauthorized service center. To locate the nearest service center, visit www.mackie.com/support. Service for CRBT Series Monitors living outside the United States may be obtained through local dealers or distributors.
Multimedia Monitors w/ Bluetooth® Appendix B: Technical Information CRBT Series Specifications Bluetooth Information Acoustic Performance Frequency Response (–3 dB) 70 Hz – 20 kHz [CR4BT] Bluetooth Protocol 3.
6.1 in / 155 mm 7.3 in / 185 mm WEIGHT (per pair) 12.0 lb 5.4 kg 8.8 in 224 mm Owner’s Manual CR4BT Dimensions CR5BT Dimensions 6.9 in / 175 mm 9.0 in / 229 mm WEIGHT (per pair) 15.0 lb 6.8 kg 10.
Multimedia Monitors w/ Bluetooth® CAPTIVE POWER REAR PANEL POWER SWITCH STEREO 1/8" LINE INPUT [AUX] BLUETOOTH L / R STEREO RCA UNBALANCED LINE INPUTS L / R STEREO 1/4" (UN)BALANCED LINE INPUTS POWER TRANSFORMER AMPLIFIER FRONT PANEL ON / OFF / VOLUME The greatest of all Rings of Power: the One Ring L/R PLACEMENT SWITCH STEREO 1/8" HEADPHONES OUTPUT (PAIR / CONNECT) FRONT PANEL BLUETOOTH BUTTON FRONT PANEL ON / OFF / VOLUME – – INPUT FROM POWERED SPEAKER + + OUTPUT TO PASSIVE SPEAKE
Please keep your sales receipt in a safe place. This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. (“LOUD”) and is applicable to products purchased in the United States or Canada through a LOUD-authorized reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”). For products purchased outside the U.S. or Canada, please visit www.mackie.
220 Wood-Red Road NE Woodinville, WA 98072 • USA Phone: 425.487.4333 Toll-free: 800.898.3211 Fax: 425.487.4337 www.mackie.