User Manual

DL32R Owner’s Manual
18
Appendix B : Technical Information
Specications
General Digital
Sample Rate: .................................................................................................................................................................................................48 kHz
A/D/A Bit Depth: .......................................................................................................................................................................................... 24-bit
System Latency
Analog Input > Main Bus > Analog Output: ........................................................................................................................ 1.5 ms
0 dBFS Reference: ................................................................................................................................................................................... +22 dBu
Frequency Response
All inputs to all outputs: .................................................................................................................................... ±0, –1 dB, 20 Hz to 20 kHz
Distortion
THD (mic input to main output, 1 kHz, –1 dBFS): ....................................................................................................................... <0.005%
Noise / Dynamic Range / Signal-to-Noise Ratio
EIN (150 termination): ..................................................................................................................................................................... –128 dBu
Crosstalk
Analog XLR input-input: ................................................................................................................<–105 dB @ 1 kHz (min. gain)
<–80 dB @ 1 kHz (max. gain)
Analog XLR / TRS output-output: ..................................................................................................................... <–100 dB @ 1 kHz
Signal-to-Noise Ratio (ref +4 dBu, one channel and main fader at unity, A–weighted): ....................................................92 dB
Output Noise (A-weighted) – Muted Output: ................................................................................................................................. –90 dB
Dynamic Range
Analog Input to Analog Output – One channel and main fader at unity, A–weighted....................................... 109 dB
Analog Input – Unity gain, to analog clipping, –60 dBFS signal, A–weighted ....................................................... 111 dB
Analog Output –To analog clipping, –60 dBFS signal, A–weighted ........................................................................... 111 dB
CMRR: .................................................................................................................................................................... >70 dB @1 kHz (60 dB gain)