User Manual

DL32R Owner’s Manual
24
Appendix C : Power and Network LEDs Values
Power
LED
Color
Power
State
Network
LED
Color
Network
State
Description
O O O O Unit o.
Green Solid Powered on and functioning normally.
Turns green when the DL32R nishes
booting properly.
Green Slow Flashing Green Slow Flashing Force update awaiting rmware update.
iPad connection is not yet established.
Green Slow Flashing Green Solid Force update awaiting rmware update.
iPad connection is established.
Green Rapid Flashing Green Solid Firmware update in progress.
Green Rapid Flashing Green Rapid Flashing Identify function has been activated
using the Dante Controller.
Flashes for 15 seconds, 2 ashes per second.
Red Solid O O Default power on until the DL32R boots successfully.
Red Rapid Flashing Error. Some problem with the
hardware processing or mixing.
Turn the mixer o,
wait 30 seconds, then power back up.
Contact Technical Support if this issue persists.
Green Solid At least one iOS device is connected
and controlling the mixer
AND
Basic Card: Networking card is functioning.
Dante Card: Dante Networking card is functioning.
DL32R is Dante network slave and is synchronized
to the clock master, or the DL32R is the Dante network
clock master.
Green Slow Flashing No iOS device connection has been established
AND
Basic Card: Networking card is functioning.
Dante Card: Dante Networking card is functioning.
DL32R is Dante network slave and is synchronized
to the clock master, or the DL32R is the Dante network
clock master.
Red Solid Basic Card: Not yet implemented.
Dante Card: Dante clock fault or network cable
is not connected to either Dante port.
Red / Green Alternate Flashing
Red/Green
Dante Card: Waiting for Dante Receive Channel
Subscriptions to be established. This may take
up to 45 seconds.
Red Rapid Flashing Red Rapid Flashing No network card found
or network card failed to boot.