User Manual

DL32R Owner’s Manual
8
Force Update Button
The force update button is conveniently located right next to the power and network LEDs and just below
the awesome DL32R logo. In a perfect world, this button would just sit there without a care in the world,
umbrella drink in hand, beach, surf and sun on a daily basis. In all likelihood, this button will live his / her
dream out, while the rest of us can only dream of such a life.
The DL32R and Master Fader app do a great job at letting you know when either (or both) the software
and rmware need updating, but this button here forces a complete rmware update if the need ever arrives.
Here’s how to force a rmware update: rst, turn the mixer o. Now, with a bent paperclip, poke the force
update button, then power up the mixer with the button depressed. The mixer will boot and you will be
prompted with an update bubble the next time an iPad with the Master Fader app is turned on.
Now that you know how to force an update, here’s a friendly reminder that you should let
the button remain peaceful, calm and tranquil, only forcing a rmware update if instructed
by Tech Support. Thank you for listening!
Save any current show to your iPad before forcing an update or you may lose it.
The show and your sanity!