User`s guide
Pro Tools MIDI Controllers Guide14
Inserts/Sends Editor
The ALT switch opens/closes the In-
serts/Sends Editor for the currently selected
Plug-In, as indicated in the DSP/EDIT dis-
play by the flashing insert on the INSERTS
view, or by the currently active Plug-In on
the PARAM view. When a Plug-In is se-
lected for editing on HUI, the correspond-
ing Inserts/Sends Editor for the Plug-In also
opens in Pro Tools. Only a single Plug-In
can be opened and edited at a time.
If the Inserts/Sends Editor for the currently
selected Plug-In is closed, you can still edit
the Plug-In using the DSP EDIT/ASSIGN
section on the HUI.
Scrolling the Edit and Mix
Windows
To scroll the Edit or Mix window:
■ Press cALT/FINE + Left or Right Arrow to
scroll the frontmost window one page in
either direction.
To scroll to session start or end:
■ Press cALT/FINE + OPTION/ALL + Left
Arrow to scroll to session start.
■ Press cALT/FINE + OPTION/ALL + Right
Arrow to scroll to session end.
Analog Monitoring Section
The analog monitoring section provides
standard control room, studio cue, talk-
back, and alternate two-track source moni-
toring capability. Up to three stereo input
sources, and output to any of three stereo
destinations are supported. In addition, it
can supply a special discrete surround mix
monitor mode for 5.1 or LCRS surround
mixing.
☞ To configure and use the analog monitoring
section with the rest of your studio, refer to the
Mackie HUI User’s Guide.
TALKBACK
MASTER
VOLUME
MUTE
OUTPUT 1
DIM
1:1 DISCRETE MONO
INPUT 1
INPUT 3
INPUT 2
OUTPUT 3
OUTPUT 2
SPKR 1
PHONES/
SPKR 3
SPKR 2
CONTROL ROOM
MAX
CONTROL ROOM
OO
MIC
LEVEL