Owner`s manual

Owner’s Manual

Bridge Mode

Binding Posts

When using the binding posts in bridge mode, connect

the positive side of the speaker cable to the CHANNEL

1 red (+) binding post, and connect the negative side

of the speaker cable to the CHANNEL 2 red (+) bind-

ing post. No, that’s not a typo. You only use the red

binding posts in Bridge mode. Do not use the black

posts.

TO SPEAKER

+ –

BRIDGE

+ +

SPEAKER OUTPUTS

Bridge Binding Post Connection

Speakon

When using bridge mode, wire the Bridge Speakon

connector the same as the stereo and mono connectors:

Bridge Speakon Connection

The red posts are labeled “+,” which means positive.

The black posts are labeled “–” for negative. Be sure

to connect the positive speaker output terminal to the

positive connection on the speaker cabinet, and the

negative speaker output terminal to the negative con-

nection on the speaker cabinet.

Speakons

When using the Speakon outputs in stereo or mono

modes, wire the Speakon connectors as shown below:

Stereo and Mono Speakon Connection

Bare Wire

Double Banana Plug

1/4"

Spade Lug

COLD

HOT

1–

2–

COLD

HOT

1–

2–