Service manual
Table Of Contents
- SPARC Enterprise M4000/M5000 Servers
- Contents
- Preface
- Safety and Tools
- Fault Isolation
- 2.1 Determining Which Diagnostics Tools to Use
- 2.2 Checking the Server and System Configuration
- 2.3 Operator Panel
- 2.4 Error Conditions
- 2.5 LED Functions
- 2.6 Using the Diagnostic Commands
- 2.7 Traditional Oracle Solaris Diagnostic Commands
- 2.8 Other Issues
- Periodic Maintenance
- FRU Replacement Preparation
- Internal Components Access
- Storage Devices Replacement
- 6.1 Hard Disk Drive Replacement
- 6.1.1 Accessing the Hard Disk Drive
- 6.1.2 Removing the Hard Disk Drive
- 6.1.3 Installing the Hard Disk Drive
- 6.1.4 Securing the Server
- 6.1.5 Accessing the Hard Disk Drive Backplane of the M4000 Server
- 6.1.6 Removing the Hard Disk Drive Backplane of the M4000 Server
- 6.1.7 Installing the Hard Disk Drive Backplane of the M4000 Server
- 6.1.8 Securing the Server
- 6.1.9 Accessing the Hard Disk Drive Backplane of the M5000 Server
- 6.1.10 Removing the Hard Disk Drive Backplane of the M5000 Server
- 6.1.11 Installing the Hard Disk Drive Backplane of the M5000 Server
- 6.1.12 Securing the Server
- 6.2 CD-RW/DVD-RW Drive Unit (DVDU) Replacement
- 6.2.1 Identifying the Type of CD-RW/DVD-RW Drive Unit
- 6.2.2 Accessing the CD-RW/DVD-RW Drive Unit
- 6.2.3 Removing the CD-RW/DVD-RW Drive Unit
- 6.2.4 Installing the CD-RW/DVD-RW Drive Unit
- 6.2.5 Securing the Server
- 6.2.6 Accessing the CD-RW/DVD-RW Drive Backplane of the M4000 Server
- 6.2.7 Removing the CD-RW/DVD-RW Drive Backplane of the M4000 Server
- 6.2.8 Installing the CD-RW/DVD-RW Drive Backplane of the M4000 Server
- 6.2.9 Securing the Server
- 6.2.10 Accessing the CD-RW/DVD-RW Drive Backplane of the M5000 Server
- 6.2.11 Removing the CD-RW/DVD-RW Drive Backplane of the M5000 Server
- 6.2.12 Installing the CD-RW/DVD-RW Drive Backplane of the M5000 Server
- 6.2.13 Securing the Server
- 6.3 Tape Drive Unit Replacement
- 6.3.1 Accessing the Tape Drive Unit
- 6.3.2 Removing the Tape Drive Unit
- 6.3.3 Installing the Tape Drive Unit
- 6.3.4 Securing the Server
- 6.3.5 Accessing the Tape Drive Backplane of the M4000 Server
- 6.3.6 Removing the Tape Drive Backplane of the M4000 Server
- 6.3.7 Installing the Tape Drive Backplane of the M4000 Server
- 6.3.8 Securing the Server
- 6.3.9 Accessing the Tape Drive Backplane of the M5000 Server
- 6.3.10 Removing the Tape Drive Backplane of the M5000 Server
- 6.3.11 Installing the Tape Drive Backplane of the M5000 Server
- 6.3.12 Securing the Server
- 6.1 Hard Disk Drive Replacement
- Power Systems Replacement
- I/O Unit Replacement
- 8.1 PCI Cassette Replacement
- 8.2 PCI Card Replacement
- 8.3 I/O Unit Replacement
- 8.4 I/O Unit DC-DC Converter Replacement
- 8.4.1 Accessing the I/O Unit DC-DC Converter (DDC_A#0 or DDC_B#0)
- 8.4.2 Removing the I/O Unit DC-DC Converter (DDC_A #0 or DDC_B #0)
- 8.4.3 Installing the I/O Unit DC-DC Converter (DDC_A #0 or DDC_B #0)
- 8.4.4 Securing the Server
- 8.4.5 Accessing the I/O Unit DC-DC Converter Riser
- 8.4.6 Removing the I/O Unit DC-DC Converter Riser
- 8.4.7 Replacing the I/O Unit DC-DC Converter Riser
- 8.4.8 Securing the Server
- XSCF Unit Replacement
- Fan Modules Replacement
- 10.1 Fan Module Replacement
- 10.1.1 Accessing the 60-mm Fan Module
- 10.1.2 Removing the 60-mm Fan Module
- 10.1.3 Installing the 60-mm Fan Module
- 10.1.4 Securing the Server
- 10.1.5 Accessing the 172-mm Fan Module
- 10.1.6 Removing the 172-mm Fan Module
- 10.1.7 Installing the 172-mm Fan Module
- 10.1.8 Securing the Server
- 10.1.9 Accessing the 60-mm Fan Backplane
- 10.1.10 Removing the 60-mm Fan Backplane
- 10.1.11 Installing the 60-mm Fan Backplane
- 10.1.12 Securing the Server
- 10.1.13 Accessing the SPARC Enterprise M4000 172-mm Fan Backplane
- 10.1.14 Removing the SPARC Enterprise M4000 172-mm Fan Backplane
- 10.1.15 Installing the M4000 Server 172-mm Fan Backplane
- 10.1.16 Securing the Server
- 10.1.17 Accessing the M5000 Server 172-mm Fan Backplane
- 10.1.18 Removing the M5000 Server 172-mm Fan Backplane
- 10.1.19 Installing the M5000 Server 172-mm Fan Backplane
- 10.1.20 Securing the Server
- 10.1 Fan Module Replacement
- Memory Board Replacement
- CPU Module Replacement
- 12.1 CPU Module Replacement
- 12.2 CPU Upgrade
- 12.2.1 SPARC64 VII/SPARC64 VII+ CPU Modules Added to a New Domain
- 12.2.2 SPARC64 VII/SPARC64 VII+ Processors Added to an Existing Domain
- Adding a SPARC64 VII/SPARC64 VII+ CPU Module to a Domain Configured With SPARC64 VI
- 12.2.3 Upgrading a SPARC64 VI CPU Module to SPARC64 VII/SPARC64 VII+ on an Existing Domain
- Motherboard Unit Replacement
- 13.1 Motherboard Unit Replacement
- 13.1.1 Accessing the M4000 Server Motherboard Unit
- 13.1.2 Removing the M4000 Server Motherboard Unit
- 13.1.3 Installing the M4000 Server Motherboard Unit
- 13.1.4 Securing the Server
- 13.1.5 Accessing the M5000 Server Motherboard Unit
- 13.1.6 Removing the M5000 Server Motherboard Unit
- 13.1.7 Installing the M5000 Server Motherboard Unit
- 13.1.8 Securing the Server
- 13.2 DC-DC Converter Replacement
- 13.2.1 Accessing the M4000 Server DC-DC Converter
- 13.2.2 Removing the M4000 Server DC-DC Converter
- 13.2.3 Installing the M4000 Server DC-DC Converter
- 13.2.4 Securing the Server
- 13.2.5 Accessing the M5000 Server DC-DC Converter
- 13.2.6 Removing the M5000 Server DC-DC Converter
- 13.2.7 Installing the M5000 Server DC-DC Converter
- 13.2.8 Securing the Server
- 13.3 Motherboard Unit Upgrade
- 13.1 Motherboard Unit Replacement
- Backplane Unit Replacement
- 14.1 Backplane Unit Replacement
- 14.1.1 Accessing the M4000 Server Backplane Unit
- 14.1.2 Removing the M4000 Server Backplane Unit
- 14.1.3 Installing the M4000 Server Backplane Unit
- 14.1.4 Securing the Server
- 14.1.5 Accessing the M5000 Server Backplane Unit
- 14.1.6 Removing the M5000 Server Backplane Unit
- 14.1.7 Installing the M5000 Server Backplane Unit
- 14.1.8 Securing the Server
- 14.1 Backplane Unit Replacement
- Operator Panel Replacement
- Components List
- Rules for System Configuration
- FRU List
- External Interface Specifications
- UPS Controller
- Air Filters
- Abbreviations
- Index
6-22 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
3. Connect the power and serial cables to the rear of the CD-RW/DVD-RW Drive
Backplane.
Caution – Do not force the CD-RW/DVD-RW Drive Unit into a slot. Doing so can
cause damage to the drive and server.
4. Install the CD-RW/DVD-RW Drive Unit.
See Section 6.2.4, “Installing the CD-RW/DVD-RW Drive Unit” on page 6-17.
6.2.13 Securing the Server
Caution – The motherboard unit is heavy. Two people are recommended to lift the
unit.
1. Install the motherboard unit.
This step includes installing the motherboard cradle, securing the busbar screws,
and installing the CPU modules and filler panels See Section 13.1.7, “Installing the
M5000 Server Motherboard Unit” on page 13-10.
2. Install the top cover.
This step includes sliding the server in to the equipment rack and restoring the
antitilt features to their original position. See Section 5.2.2, “Replacing the Top
Cover” on page 5-8.
3. Power the server on.
This step includes reconnecting power cables, verifying the state of the LEDs, and
turning the keyswitch to the Locked position. See Section 4.4.2, “Powering the
Server On Using Software” on page 4-13.
Note – If the Oracle Solaris automatic booting is set, use the sendbreak -d
domain_id command after the display console banner is displayed but before the
system starts booting the operating system to get the ok prompt.
4. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to Section 4.3.2, “Verifying Hardware Operation” on page 4-9 for more
information.