User's Manual

12
MR5mk2
MR5mk2
Appendix C: Technical Information
AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea: 220 VAC, 60 Hz
Japan: 100 VAC, 50/60 Hz
Note: The MR5mk2 does not support multiple voltage
configurations. Make sure the voltage rating for your particular
model (as indicated on the rear panel near the IEC socket)
corresponds with your local AC mains voltage.
AC Connector: 3-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6AL/250 V
230 VAC: T 800 mAL/250 V
Power Consumption:
75 watts with music, loud mix
10 watts quiescent (idle)
Physical Dimensions and Weight
Enclosure: 0.625 in / 15 mm thick MDF with
0.625 in / 15 mm MDF front panel
Damping: Adiabatic batting
Dimensions:
Height: 11.5 in / 292 mm
Width: 7.8 in / 197 mm
Depth: 10.6 in / 269 mm
Weight: 14.3 lb / 6.5 kg
Disclaimer
LOUD Technologies is always striving to improve our products
by incorporating new and improved materials, components and
manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
MR5mk2Specications
Acoustic Performance
Free Field Frequency Response:
50 Hz – 20 kHz
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:
104 dB SPL @ 1m
Maximum SPL Per Pair: 116 dB SPL @ 1m
Transducers
Low Frequency: 5.25 in / 133 mm hyperbolic
curved cone woofer
High Frequency: Neodymium magnet driven
1 in / 25 mm silk dome tweeter
Ampliers
Low Frequency Power: 55 watts, 4 Ω load,
110 watts peak
High Frequency Power: 30 watts, 8 Ω load,
60 watts peak
Type: Monolithic IC, Class AB with
DMOS power stage
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kΩ, balanced bridging;
10 kΩ unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving
High Frequency EQ: ±2 dB @ 5 kHz, shelving
10.6" /
269 mm
11.3" /
287 mm
MR5mk2
WEIGHT
14.3 lb /
6.5 kg
7.8" / 197 mm