Mackie Control Universal Pro Mackie Control Extender Pro Quick-Start Guide MINUTES HOURS MACKIE CONTROL EXTENDER PRO MACKIE CONTROL UNIVERSAL PRO SECONDS FRAMES SMPTE RUDE SOLO BEATS ASSIGNMENT 1 2 3 4 5 6 7 1 8 2 3 4 5 6 7 8 BARS BEATS SUB DIVISION TICKS VPOT ASSIGN DISPLAY REC REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL REC SIGNAL TRACK
Mackie Control Universal Pro CAUTION AVIS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.
Thank you for choosing Mackie for your Digital Audio Workstation (DAW) control solution. Mackie Control Universal Pro (MCU Pro) and Mackie Control Extender Pro (MCE Pro) provide the familiar feel of analog-style mixing to your DAW environment. But they also deliver the most complete feature set and software compatibility of any control surface available today, including USB connectivity. The labels for the buttons and controls are specific to Apple Logic Pro.
Mackie Control Universal Pro • Select the Mackie Control in the MIDI device setup section of your DAW application. • Once the Mackie Control is selected within your software’s setup preferences, the unit(s) will be recognized automatically. • Mackie Control Universal Pro/Mackie Control Extender Pro units can function as a single large console — a “Control Surface Group.” • Go to the MCU Support section on our website (www.mackie.
Mackie Control Extender Pro Mackie Control Universal Pro PORT 2 PORT1 (INTERNAL) = MCU IN PORT 3 OUT IN PORT 4 OUT IN EXTERNAL POWER MIDI EXTERNAL CONTROL USER SWITCH 1 OUT EXTERNAL POWER 2 7.5V POWER IN OUT 3.0A-4.0A MIDI IN Mackie Control Extender Pro POWER EXTERNAL POWER MIDI IN 7.5V 3.0A-4.0A MIDI OUT OUT Mackie Control C4 Pro MIDI IN EXTERNAL POWER MIDI POWER IN 7.5V 3.0A-4.0A MIDI OUT MIDI IN OUT POWER 7.5V 3.0A-4.
Mackie Control Universal Pro Using the Mackie Control Universal Pro 2. SELECT Although the functions of the knobs and buttons on the MCU Pro will vary depending on which software application you are using it with, this section provides an overview of the control surface and a general explanation of what it can do. This button selects the corresponding channel for channel-based editing or assignment commands. 3. MUTE Channel Strip The MUTE button turns off the corresponding channel’s output signal. 1.
Quick-Start Guide Master Section 9. V-POT ASSIGN These six buttons are used to assign different functions to the V-Pots. These usually include Pan, Aux Send, EQ, Plug-In Effects, and Track level. 10. BANKS and CHANNELS Pressing the left or right BANK button jumps over to the next adjacent eight channels on either the left or right side of the current location. • If one or more Mackie Control Extenders are present, the BANK buttons jump over by 8 times the number of devices present.
Mackie Control Universal Pro Rear Panel 21. USER SWITCH 1 and 2 17. USB Port This is the USB connection between the MCU Pro and the host computer. Use the USB cable provided to connect this port to a USB port on your computer. Note: When the MCU Pro is connected to your computer with the USB connection, it appears as a 4x4 MIDI device to your computer and your DAW application. The MCU Pro control surface appears as Port 1 in the DAW application.
OUT 4.7 in/ 12.0 cm POWER 7.5V 3.0A-4.0A 10.0 in/25.4 cm MACKIE CONTROL EXTENDER PRO WEIGHT 6.9 lbs/ 3.
Mackie Control Universal Pro Service If you think your Mackie Control Universal Pro or Mackie Control Extender Pro has a problem, please do everything you can to confirm it before calling for service. Visit the Support section of our website (www.mackie.com/support) where you will find lots of useful information such as FAQs, documentation, and user forums. You may find the answer to the problem without having to send your Mackie Control away.
Please keep your sales receipt in a safe place. A. LOUD Technologies Inc. warrants all materials, workmanship and proper operation of this product for a period of two years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, LOUD Technologies, at its option, will repair or replace the product. This warranty applies only to equipment sold and delivered within the U.S.
16220 Wood-Red Road NE • Woodinville, WA 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and South America: 425.487.4333 Middle East and Africa: 31.20.654.4000 Fax: 425.487.4337 • www.mackie.com E-mail: sales@mackie.