Installation Guide
page 3 of 4
Once The Driver Has Been Installed
The Mackie USB Driver settings for the device may now be
accessed by clicking on the Mackie Running Man icon.
These are the menus for the Control Panel:
. Status tab – to change USB Audio Device (if multiple
are connected) and view current sample rate.
2. Format tab [not applicable to DL6S and DL32S] – to
view Input settings and change Output Bit Depth
settings. We recommend leaving this set to 24 bits.
If you must change it, close all audio applications
before changing.
3. Buer Settings tab – to change the ASIO Buer Size.
Please see the next page for additional information
on choosing the best buer settings.
4. Volume tab – to change the volume of the inputs and
outputs. We recommend leaving these at their
defaults and never changing them.
5. Info tab – to view the Device and Driver Info.
This might be useful to Tech Support, so please
have it handy before calling in.