User Manual

6
HOOKUP DIAGRAMS
Quick Start
1. Start with the following settings on the back of the
SRM450 v2:
Turn the POWER switch off (down).
Set the TIMED TURNOFF, CONTOUR, and LOW CUT
switches out.
WARNING: Turn the LEVEL control
down (counterclockwise) before every
use. If not, you could be in for a startling
surprise, especially if the last time you
used it was with a microphone and now
you want to connect a line-level source.
2. Connect the output from your signal source (mixing
console, microphone, preamp, or other mic- or line-level
source) directly to the INPUT connector on the back of
the SRM450 v2. It accepts balanced line-level signals from
mixers, preamplifiers, CD players, tape decks, etc., and
accepts direct connections from dynamic microphones.
3. Connect the supplied AC power cord to the IEC socket
on the back of the SRM450 v2. Plug the other end into
an AC outlet properly configured with the correct volt-
age for your particular model.
4. Turn on your signal source. Make sure its Master Vol
-
ume control (if it has one) is turned all the way down.
5. Turn on the SRM450 v2 POWER switch.
6. Start the signal source, whether it be speaking into a
microphone or starting a CD player. Adjust any volume
controls on the signal source for normal operation.
7. Slowly turn up the LEVEL control on the back of the
SRM450 v2 until the desired volume is reached (and
the PEAK light does not come on) Always wear hear-
ing protectors if you are close when it is playing at high
levels.
8. If there is no sound,
always turn down the SRM450 v2
LEVEL control before investigating. There may be a
mixer or preamplifier mute or tape switch engaged, or a
mic switch off.
SRM450 v2: STEREO OPERATION WITH A MIXER, AND USING THE THRU jACK
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
100 - 120V
50 - 60 Hz 300W
POWER
SIGNAL PRESENT
INPUTTHRU
THERMAL PEAK
TIMED TURNOFF
ON
OFF
CONTOUR LOW CUTON
75Hz12k/AIR100Hz
+3dB
MIC
LINE
LEVEL
(+4dBu)
NORMAL
+40dB
OO
O
PARALLEL
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
Thru
Daisy-chaining SRM450 v2s
Thru
Next
Next
PREMI UM AN ALOG MIXE R
w/ PERK INS E Q & FIREW IRE O PTIO N
1 2 3 4 5
6
7
8
9
10
11
12
PREMIUM AN ALOG MIXE R
w/ PERKINS EQ & FI REWIR E OPT ION
1 2 3 4 5
6
7
8
9
10
11
12