DIGITAL AUDIO HARD DISK RECORDER Operation Guide SDR24/96 Operation Guide
25
Operation Guide
Operation Guide
Renaming a Project
You can give a project a new name at any time. The project cannot be open when
you rename it.
To rename a Project:
1. Press Project. Press
the Page Right
button, and in the
Project Files Menu,
select Rename.
2. If there is more than one hard
drive, choose the drive that
contains the project you want
to rename by selecting either
Internal or External from the
Select Drive screen using the << / >> buttons. The selection defaults to
the drive containing the currently open project. Select Next.
3. Use the << / >> buttons to
scroll through the Project list,
then select Rename.
4. The RENAME PROJECT AS
screen appears. To give the
project a new name, press the
Page Right
button. A
blinking cursor appears over
the first character of the
name. Use the increment (Inc)
and decrement (Dec) buttons
to change the highlighted character. It scrolls through a modified ASCII
character set. Use the >> button to move to the next character.
5. Press the Page Left
button when finished, and then select OK. Project
renamed appears in the display to confirm that the project was
successfully renamed.
Purging a Project
The purge command compares the contents of the AudioFiles subdirectories in a
project with the audio files that are referenced in the project files and history list,
and deletes any audio files that are not used.
This utility is a two-step process. The first step is to delete files not referenced by
the project files and history list. The second step is to clear the history list. The
history list contains a record of all previous edit operations and recording passes
within the project in chronological order. This allows you to undo and redo
operations, with up to 99 undo levels. Clearing the history list means you cannot
undo any previous edits or recording passes. Note that any time you open a new
project, the history list is automatically cleared.
PROJECT
PROJECT FILES MENU >
New Open Save SaveAs
< PROJECT FILES MENU
Delete Copy Rename Purge
SOURCE DRIVE: Internal
<< >> Next
Smooth as Silk
<< >> Rename Cancel
RENAME PROJECT AS: >
OK Cancel
< Smooth as Silk
<< >> Inc Dec