Owner's Manual

Thump GO 8" Portable Battery-Powered Loudspeaker
18
Thump GO 8" Portable Battery-Powered Loudspeaker
Thump GO Specifications
Appendix B: Technical Information
Safety Features
Input Protection Peak and RMS limiting, power supply
and amplifier thermal protection
Display LEDs Voicing Mode, Outdoor Mode,
Music Ducking, Feedback Eliminator,
Front LED, Bluetooth Status,
Link Status, Overload, Battery Level
Battery Information
Battery Type Lithium Ion
Battery Life Up to 2 hours
Charge Time 3 hours (no signal)
4 hours (with signal)
Capacity 5200 mAh
Nominal Voltage 4.8 V
Operating Temperature Range 5 ~ 35 ˚C // 59 ~ 95 ˚F
Charging Temperature Range 0 ~ 45 ˚C // 32 ~ 3 ˚F
Construction Features
Basic Design Asymmetrical
Enclosure Material Polypropylene
Enclosure Finish Black, textured finish
Grille Material Perforated metal
w/weather-resistant coating
Grille Finish Powder-coated black
Handles One
Operating Temperature 0 – 40 ˚C // 32 – 04 ˚F
Physical Properties
Height 8.0 in / 457 mm
Width 9. in / 230 mm
Depth .2 in / 285 mm
Weight 7.6 lb / 8.0 kg
Mounting Methods:
Floor mount or pole mount via the built-in socket on the bottom
of the cabinet [Be sure the pole is capable of supporting the weight
of the Thump GO].
They are NOT designed to be suspended. The cabinet has no rigging
points and is not suitable for rigging. Never attempt to suspend
a Thump GO by its handle.
See pages 5–6 for more information.
Options
Thump GO Bag P/N 2053622
Replacement Battery P/N 2053625
T00 Loudspeaker Tripod Stand P/N 2052464
SPM400 Loudspeaker Pole Mount P/N 205055
Disclaimer
Since we are always striving to make our products better by incorporating new and
improved materials, components, and manufacturing methods, we reserve the right to
change these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD Audio, LLC.
All other brand names mentioned are trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.
©2022 LOUD Audio, LLC. All Rights Reserved.
Acoustic Performance
Frequency Range (–0 dB) 50 Hz – 20 kHz
Frequency Range (–3 dB) 57 Hz – 20 kHz
Horizontal Coverage Angle 90º
Vertical Coverage Angle 60º
Maximum SPL Peak 5 dB
Monitor Angle 45˚
Transducers
Low Frequency 8 in / 203 mm with ferrite
High Frequency .0 in / 25 mm polymer
compression driver
Power Amplifiers
System Power Amplification
Rated Power 200 watts peak
Low Frequency Power Amplifier
Rated Power 75 watts peak
Rated THD < %
Cooling Convection
Design Class D
High Frequency Power Amplifier
Rated Power 25 watts peak
Rated THD < %
Cooling Convection
Design Class D
System Processing
Voicing Four speaker modes
Input/Output
Input Type 2x Female XLR & /4" Balanced TRS
combo jack • /8" TRS • Bluetooth
Mic-Line Impedance 20 k
balanced
/4" TRS / XLR 20 k
balanced
Output Type Male XLR Balanced [Thru]
Thru Impedance 50
balanced
Electronic Crossover
Crossover Type 24 dB/octave
Crossover Frequency 2.2 kHz
Line Input Power
Detachable line cord 00 – 240 VAC, 50 – 60 Hz, 75W
AC Connector 3-pin IEC 250 VAC, 0 A male
Power Supply Type Switchmode