Owner's Manual

2/5 PAGES
THUMP GO SPECIFICATIONS
Acoustic Performance
Frequency Response (–10 dB) 50 Hz – 20 kHz
Frequency Response (–3 dB) 57 Hz – 20 kHz
Horizontal Coverage 90°
Vertical Coverage 60°
Maximum SPL Peak 115 dB
Monitor Angle 45°
Transducers
Low Frequency 8 in / 203 mm
with ferrite
High Frequency 1.0 in / 25 mm polymer
compression driver
Power Amplifiers
System Power Amplification
Rated Power 200 watts peak
Low Frequency Power Amplifier
Rated Power 175 watts peak
Rated THD <1%
Cooling Convection
Design Class D
High Frequency Power Amplifier
Rated Power 25 watts peak
Rated THD <1%
Cooling Convection
Design Class D
System Processing
Voicing Four speaker modes
Input / Output
Input Type 2x Female XLR & 1/4" Balanced TRS
combo jack • 1/8" TRS • Bluetooth
Mic-Line Impedance 20 kΩ balanced
1/4" TRS / XLR Impedance 20 kΩ balanced
Output Type Male XLR Balanced [Thru]
Thru Impedance 150 Ω balanced
Bluetooth Information
Bluetooth Protocol 5.0
Bluetooth Function Audio Streaming and
User Interface Control
Electronic Crossover
Crossover Type 24 dB / octave
Crossover Frequency 2.2 kHz
Line Input Power
Detachable line cord 100 – 240 VAC, 50 – 60 Hz, 75W
AC Connector 3-Pin IEC 250 VAC, 10 A male
Power Supply Type Switchmode
Safety Features
Input Protection Peak and RMS limiting, power supply
and amplifier thermal protection
Display LEDs Voicing Mode, Outdoor Mode, Music Ducking,
Feedback Eliminator, Front LED, Bluetooth Status,
Link Status, Overload, Battery Level
Battery Information
Battery Type Lithium Ion
Battery Life Up to 12 hours
Charge Time 3 hours (no signal)
4 hours (with signal)
Construction Features
Basic Design Asymmetrical
Enclosure Material Polypropylene
Enclosure Finish Black, textured finish
Grille Material Perforated metal
w/weather-resistant coating
Grille Finish Powder-coated black
Handles One
Operating Temperature 0 – 40 °C
32 – 104 °F