Manual

Operating Instructions
1.
Stop the engine and disconnect the spark plug wire and make sure that all moving parts have come to a
complete stop before attempting to inspect, service, or clean obstructions or blockages from the intake or
discharge passages.
2. Stop the engine and allow it to cool for at least two
minutes before refilling the gas tank or before lifting leaf
blower.
3. For maximum air speed, run the engine with throttle wide
open in the =FAST" position.
4. To change air flow from side to front, simply pull diverter
handle back to direct air flow to the side and push the
handle forward to direct air flow to the front.
5. When frequent switching of front and side discharges is
needed, attach spring to standard position (as from
factory). If side discharge is used frequently, attach spring
to optional position, as shown in Figure #1. In the optional
position, the air diverter will automatically snap from the
front to the side discharge when engine speed is reduced.
The spring iseasily moved with needle nose pliers.
SIDE
DISCHARGE
FRONT DISCHARGE
F-STANDARD
I|f _TION
II _ I HOUSINGI
POSITION
FI6URI_ NO. I
Maintenance Instructions
€
Follow engine owner's manual for engine maintenance and repair.
Allow the machine to cool before making any inspections or adjustments.
When not in use, your leaf blower should be stored out of reach of children. Be
sure there are no gasoline fumes in the storage area. Always allow the engine to
cool before stodng.
Do NOT run the machine in an enclosed area since the exhaust from the engine
contains carbon monoxide which is colorless, odorless, and tasteless and can be
extremely dangerous.
Operators shall not tamper with the engine governor settings on the engine
which controls the maximum safe operating speed and protects the engine from
overspeeding.
Order parts with your model number, engine horsepower, and part number.