Installation Instructions

Instruction For WM110
General Setting:
 Press power button for 2 seconds to switch on/off.
 Press power button of Transmitter 2 times to switch on/off Silent Mode.
 Press transmitter up/down button to adjust volume on receiver.
 Press receiver up/down button to adjust channels.
 Press both up & down buttons of receiver at the same time for 2 seconds to
unlock button lock on receiver.
Display:
 Sign “A” means a microphone is connected.
 Sing “B” means two microphone are connected.
Transmitter(Black):
 “- -“ means waiting for connection.
 “UX” means maximum volume. Transmitter control volume from U1-UX.
 “00-19” means channel & “ AU” means auto connection.
 System will shut down automatically if not in connection for over 100
seconds.
 System will shut down automatically if there is no input for over 20
minutes.
Receiver(Blue):
 “00-19” means channel & “ AU” means auto connection.
 Up & Down button will be locked automatically when not in use for over 5
seconds.
 System will shut down automatically if not in connection for over 20
minutes.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does