Brochure

Tunstall Corporation
118 Exchange Street • Chicopee, MA 01013
© July 2014
We reserve the right to alter designs, specifications and information without notice.
Phone [phone] · Fax [phone]
www.tunstall-inc.com • www.maconcontrols.com
Bulletin-ZMC-DDC-0714
Electric Operators
ELECTRIC ZONE VALVE ACTUATOR
ZMC - DDC Series
3
3.1 Dimensions
4) Installation notes
4.1 Installation with valve adapter
The valve adapter assortment guarantees a perfect match of the valve drive to almost any valve bottom and heating circuit
distributor available on the market. Simply snap-on the Macon ZMC-ES to the manually pre-installed valve adapter.
Screw the adaptor manually
onto the valve.
Place the Macon ZMC-
DDC manually in vertical
position to the valve adap-
tor.
The Macon ZMC-ES snaps
onto the valve adaptor with
a “click” when pressed
down vertically by hand.
4.2 Installation position
The Macon ZMC-DDC must be installed preferably in
vertical or horizontal installation position. For over-
head” installation special circumstances (e. g. drain-
water) can reduce the lifetime of the actuator.
Connect the line to the
actuator.