Brochure
Table Of Contents
Tunstall Corporation 
118 Exchange Street • Chicopee, MA 01013 
© July 2014 
We reserve the right to alter designs, specifications and information without notice. 
Phone (413) 594-8695 · Fax (413) 598-8109 
www.tunstall-inc.com • www.maconcontrols.com 
Bulletin-MTWZ-0714 
Non-Electric Operators 
THERMOSTATIC OPERATOR 
DIRECT MOUNT w/REMOTE SENSOR 
MTWZ
Operation 
The sensor on the MTWZ is wax-filled and the wax volume varies according to ambient temperature. 
The volume changes are transmitted to the valve stem via a liquid capillary system. The valve body has a 
return spring which closes the valve when the stem is under low pressure. When the force from the sen-
sor and the return spring are balanced to the room temperature selected, the valve disc stops in that posi-
tion to allow a certain amount of water or steam to flow through the valve. Ambient temperature changes 
cause the valve disc to change position and thereby continuously modulate the flow so that the room 
temperature is maintained at the desired temperature. The unit is secured against damage from over-
pressure by a built-in pressure absorbing spring. 
Features and Benefits 
• Valve-mounted setting knob and remote tem-
perature sensor 
• Brass sensor, High sensitivity 
• Fiberglass valve plug shaft 
• Stainless steel capillary tube, 6’6” standard 
length 
• Longer capillary available, consult factory 
• Fits all Macon NT series valves 
• Replaces the valve-mounted sensors on built-in 
convectors, etc., and where the valve-mounted 
sensor is exposed to draft from doors and win-
dows 
• Fully automatic - nonelectric, no wiring 
• Manufactured to exacting standards using ex-
ceptionally high quality materials 
• Each sensor is tested and re-checked to achieve 
exact settings before leaving the factory 
• Note that changing the actuator can be accom-
plished without draining the system 
• All Macon thermostats can be locked at or lim-
ited to a specific temperature or temperature 
range 
• Simple one-trade installation 
• Sensor guard furnished at no extra cost 
• All Macon valves and thermostats conform to 
ASHRAE Standard 102P-1983 and European 
Standard EN 215/1215. We are also ISO 9001 
certified (2002) and ISO 14001 certified (2002). 
See reverse for 
min/max field adjustment 
(MTWZ shown with 
Macon NT series valve) 










