Brochure

Phone [phone] · Fax [phone]
www.tunstall-inc.com • www.maconcontrols.com
Bulletin-MC-RCM-1014
Electric Operators
Tunstall Corporation
118 Exchange Street • Chicopee, MA 01013
© July 2014
We reserve the right to alter designs, specifications and information without notice.
Remote Control Module - MAC-RCM
10
Operating level
Setting the setpoint
■ The setpoint can only be changed in comfort mode .
► Briefly press the knob.
The setpoint indicator flashes for 2 s.
► Set the desired setpoint using the knob.
The new selected value is displayed for approx. 2 s; it is then automatically applied and the
room control module switches to the initial display.
A new setpoint can be also applied by pressing the knob for approx. 2 s.
Configuration level
Setting party mode (program time extension)
■ The maximum party time is 8 h.
■ This can be set in steps of 30 minutes.
► Press the knob for 2 s.
► Select the “Party mode” function using the knob.
► Briefly press the knob.
Current time displayed = start of party mode (program time extension).
► Set the end time for party mode (program time extension) using the knob.
► Confirm the entry by briefly pressing the knob.
The display switches back to the initial display.
■ The party time is effective immediately and comfort mode is switched on.
The activated party mode is represented by the party icon on the display.
■ Party mode can be ended prematurely by pressing the occupancy button.