Brochure

Tunstall E-Z-Fit™ Conversion Kit
Instructions “T” Style (thread in)
Tunstall Corporation
118 Exchange Street • Chicopee, MA 01013
© July 2014
We reserve the right to alter designs, specifications and information without notice.
Phone [phone] · Fax [phone]
www.tunstall-inc.com • www.maconcontrols.com
Bulletin-INST-EZFIT-0714
Conversion Inserts
1. Remove existing valve components. Thoroughly
clean and inspect interior of valve.
2. Drop in the supplied removable seat. The seat
should have a gasket on the bottom side and a
spring affixed to the top.
3. Thread in Tunstall insert assembly and secure.
4. Affix the operator to the top of the insert assembly.
Pictured to the left is a typical installation. Retrofit kit
may or may not include spring and removable seat.
Skip the steps that do not apply and proceed with
your installation.
That’s it!
Now your radiator is under “Macon Control.”
If you have any questions do not hesitate to call your
representative or the factory.