User manual

If you forget your
login name or
password, press
and hold the reset
button, turn on the
device and wait for
10 seconds before
releasing it. This will
reset the device to
its factory default
setting.
System default
language is English.
If you want to store
or transfer files with
a different encoding
(different language),
please choose the
corresponding
language from the
drop down list.
If the encoding
doesn’t match the
language of your
files, the transfer
can not be
completed.
A pop-up dialogue box will appear and prompt you for your
user name and password.
Default Settings
User name: admin
Password: admin
We strongly suggest you to change this, as soon as you are
logged in, to prevent unauthorised access.
After login you are able to configure and customise all your
settings from that screen. By default, the system is set up so
that it can be used without further modification.
System Information
If required, you may change any of the settings such as host
name, group name, login, time, encoding and IP configuration.
Maintenance
The tools found under maintenance can be used to upgrade
the firmware of your LAN disk and to reset the device to its
factory default settings. Read the description displayed for
each tool for more details.
- 11 -