User manual

If you don’t use the
disk utility to format
the drive, make
sure that you
choose the FAT32
file system,
otherwise it won’t
be recognised on
the network.
Formatting the disk
will erase all your
data on the hard
drive. Make sure to
backup you files
BEFORE you click
on “Format”!
Disk Utility
You may use the disk utility to format your drive, scan for disk
errors and set the idle time before the device switches to
standby mode.
When you format the drive using the disk utility, it will create a
single partition using the FAT32 file system. If you create other
partitions when connected through USB or choose a different
file system, keep in mind that the LAN disk is only able to
recognise the first partition and it has to be FAT32.
- 14 -