User manual

Please read your
warranty carefully,
as this may vary
between different
vendors!
If you experience
network connection
problems, use the
IP address instead
of the STORAGE
name.
For troubleshooting
and to upgrade the
firmware, connect
the LAN disk
directly to your
computer using the
standard Ethernet
cable.
Technical Questions
For RMA and other questions, please contact your vendor or
check out their online support area!
FAQ
Q: I forgot my login, what do I do?
A: If you forgot your personal login for the LAN disk, press and
hold the reset button, turn on the device and wait for ten
seconds before releasing it. This will reset the device to its
factory default settings.
Q: SMB access doesn’t work on Mac OS 10.4.
A: With earlier versions of Mac OS 10.4, the LAN disk can not
be accessed through SMB. Please upgrade to Mac OS 10.4.3
or later to resolve this problem.
Q: FTP access on my Mac doesn’t work.
A: The FTP utility on the Mac will be able to read the data on
the LAN disk but you can not write new data to the drive. To do
that, you will need to install a dedicated FTP application, which
can either be a free utility or professional shareware program.
Q: My HDD is not recognised.
A: Please make sure to set the jumper of your hard drive to
Master when you install the drive and then use the disk utility of
the web admin interface to format the drive.
Q: Do settings of the LAN disk work the same via USB?
A: No. When used as USB disk, those settings no longer apply.
Q: I can not find my city on the time zone list.
A: Please set the time manually by changing the numbers for
“Time”, then save the new setting.
- 15 -