User manual

USER MANUAL
M9-SATA USB/LAN
To reset the device,
e
t for
).
button
nd reboot the LAN
isk.
to its factory default
settings, press and
hold the reset
button, turn on th
power and wai
the LED to stop
blinking (~30 sec
Release the
a
d
By default, the
encoding is set to
English. If you wan
to store or tra
t
nsfer
les with a different
ncoding (different
language), choose
the corresponding
language from the
er
twork
.2.1 Status
fi
e
drop down list.
If the encoding
does not match the
language of your
files, the transf
can not be
completed and file
names will be
corrupted.
4.2 Web Configuration
Open your web browser, enter the IP address of your ne
drive and login. The default login is admin/admin.
4
• Host Name: This name is used to identify your device on the
network. If you prefer a different name that is easier to
identify, click on Change and type in a new name.
• Group Name: This should be the same name as your
workgroup. In general, the default, WORKGROUP will be OK
but if your workstation belongs to a different group, click on
Change to modify the workgroup.
On a PC, right click on My Computer and choose Properties.
ory
Utilities). Select SMB
and click Configure to modify the settings (administrator
uired to access this option).
Go to the Computer Name tab to see your current workgroup.
For a Mac to join a Windows workgroup, open the direct
access utility (under Applications Æ
access is req
Page 12 / Chapter 4 - LAN Disk Setup