User manual

USER MANUAL

M9-SATA USB/LAN

It is recommended

to periodically

check the website

of your vendor for

possible updates.

Never turn off your

device during the

firmware upgrade

procedure or it may

damage it!

Here you can update the loader and

puter and unzip them if

necessary.

• Firmware Upload:

firmware for your network drive.

1. Download the latest firmware and loader from yo

vendor’s website.

2. Store the files on your com

3. Click on Browse and locate the firmware (BIN file).

4. Click on Upload.

5. Confirm the pop-up message to start the upgrade.

6. Wait and DO NOT click anywhere else or turn off the

power! This might take a few minutes.

7. Once the upgrade is done, it will prompt you to reboot the

device.

8. Click on Reboot to restart the device.

9. Wait for about one minute and then go to the Status page

to confirm the upgrade was successful.

Page 16 / Chapter 4 - LAN Disk Setup