User manual

USER MANUAL
M9-SATA USB/LAN
The password is
optional and only
required if you like
to limit access to it.
A star mark after th
folder name means
that this directory is
passwo
e
rd protected.
You don’t usually
’s
have to enter a
username but if it
required for login,
use guest.
Remember to
enable the Samba
4. To limit access, you can set an optional password. Select
the folder in the sharing list and click on Password.
service on the
Status page when
you plan on using
the SMB server.
5. Enter a new password for this folder. When the user tries to
access this folder later, this will be the password they need
to type in.
6. In the sharing list, the folder will now have a star mark. This
means that it is password protected.
Now that you have set up the folders that you wish to share on
your LAN disk, you can access them from other computers on
your local network.
You can remove the folders from the sharing list at any time
and also rename them if required. When deleting, remember
that this will also remove all the files in that directory!
Page 19 / Chapter 4 - LAN Disk Setup