User manual

USER MANUAL

M9-SATA USB/LAN

For RMA and other

ase

ot be read or written. If you get

is error message, use the IP address instead of STORAGE.

browser.

2. Under SMB Server, make sure the folder you want to access

is in the Sharing List (e.g. PUBLIC without password).

3. Go to IP Config, make sure it is set to Automatic IP and write

down the IP address you see there.

4. Go to your Finder and select Go/Connect to Server

5. Type smb://IP/PUBLIC and click on Connect. For the IP use

the IP address you wrote down in step 3, for PUBLIC use

the folder name you added to the Sharing List in step 2.

6. If the LAN disk is connected directly to your computer using

6.2 About Data Backup

To protect your files and help prevent the loss of your data, we

strongly recommend that you keep two copies of your data,

one copy on your LAN disk and a second copy either on your

internal drive or another storage media such as a CD, DVD,

Tape or an additional external drive.

Any loss or corruption of data while using the LAN disk is the

sole responsibility of the user, and under no circumstances will

the manufacturer be held liable for compensation or the

recovery of this data.

questions, ple

contact your vendo

or check out their

online support are

Q: I get Error Code -36

A: The Finder cannot complete the operation because some

data in "smb://storage" could n

1. Log in as admin using your web

the Ethernet cable, the default IP address is 169.254.0.1.

Page 35 / Chapter 6 - Appendix