User manual

USER MANUAL
M9-SATA USB/LAN
Always remove the
power adapter from
the main socket
before you open
your enclosure.
Your unit might
rive.
re,
his
come with an
installed hard d
Before opening
such an enclosu
please read the
warranty and any
other notes from
your vendor
carefully, as t
might void your
warranty.
Be careful not to
s damage any cable
or components and
do not bend the
thermal probe.
2 Installing the HDD
2.1 Preparing the Enclosure
Lift the top plastic cover off the body. If it’s already locked in
place, push it upwards with a thin and small item through the
opening at the bottom. After the plastic cover has been
removed, lift the metal sheet cover off the case.
Install the hard drive, connect the cables and attach the
thermal probe with the tape provided to the top of the drive,
somewhere near the spindle motor.
Page 3 / Chapter 2 - Installing the HDD