User manual

USER MANUAL
M9-SATA USB/LAN
Make sure your
computer is
connected to the
same network as
your LAN disk.
Do not connect the
USB and Ethernet
cables at the same
time!
To assure optimum
performance on the
network, only use
network switches
and routers.
If you buy a spare
power adapter,
make sure the
specifications are
identical with the
power adapter
supplied!
3 System Setup
In LAN mode, the M9-SATA is attached to an Ethernet switch
or router. Each user on the network can use the LAN disk and
access it using FTP or SMB.
In USB 2.0 High Speed mode, the M9-SATA is directly attached
to a single computer via the USB connection. Only one
workstation at a time can access the drive.
A few thoughts on how to operate your device:
• Do not cover the enclosure and leave enough room around
it for the drive to cool down.
• Do not expose the product to water or humid conditions.
• Always check for visible damage and defects to power and
interface cables before use.
• We recommend only using the cables and adapter supplied
with your product.
Page 5 / Chapter 3 - System Setup