User manual

USER MANUAL
M9-SATA USB/LAN
If you modify the
the
N
isk is only able to
ccess the first
partition and only if
it’s formatted using
tting the drive
ill erase all data
nd settings of the
LAN disk as well!
partitions or file
system when
drive is connected
via USB, keep in
mind that the LA
d
a
the FAT32 file
system.
Forma
w
a
The users and
passwords you set
up for your network
drive do not apply
hen the drive is
connected via USB.
You will have
unlimited access to
3.1.1 USB Connection
Before connecting the device, make sure the hard drive has
been installed properly and the power supply has been
connected to the main socket. If the drive has been pre-
installed and setup already, just connect and turn it on.
• Turn on your computer and start Windows
• Connect the device via USB and turn it on
• Let Windows search and install the driver automatically
• Open “My Computer” to see your external hard drive
If the system doesn’t recognise the drive, make sure it has
been formatted properly by using the disk utility of the LAN disk.
If it has been formatted already, disconnect and re-connect the
USB cable or turn on the power first, before connecting the
USB cable.
3.1.2 Remove Procedure
For the safe removal of your drive and to assure that no data is
lost, always follow the correct unplug procedure. Otherwise, an
error message will appear.
• Click on the taskbar icon for external hardware
w
all files and folders!
Installation on a PC using USB 3.1
• Choose your external hard drive and confirm to remove it
Page 6 / Chapter 3 - System Setup