User guide

Analog Audio Setup
The simplest configuration is when
the analog audio system on your TV
set is used. In this case, no matter
what type of AV cable you use (the
default providing Composite/S-Video
signal, one of the optional cables
providing Video Component YPbPr,
or SCART), the analog audio is
provided to the stereo input of your
TV by the Left/Right RCA jacks.
S-VIDEO
T
V
or
Composite
or
Video Component YPbPr
or
SCART
Analog
L-R Audio
Mvisto
This configuration uses only one AV
cable connected to the multi-
connector port on Mvisto.
With this simple setup, you can get the highest video quality, but the audio quality remains the
stereo analog quality provided by the TV set speakers.
Digital Audio Setup
5.1 Speaker
System
This configuration provides the best mix
of video and audio quality.
T
V
In this setup, you can connect any of the
available AV cables except the stereo
L/R RCA jacks to the TV set speakers.
Instead, you use the Digital Audio Port of
Mvisto. Connect this port using the
SPDIF copper coaxial or the optional
optical audio cable to the digital input of
your Dolby Digital or DTS Home Theatre
Receiver/Processor. Provided the quality
of this receiver and the correct setup of
the 5.1 Speaker System, you can
experience optimum multimedia quality in both audio and video.
Mvisto
S-VIDEO
o
r
Composite
o
r
Video Component YPbP
r
o
r
SCART
Digital Audio Out
(SPDIF)
Dolby Digital o
r
DTS Home Theatre
Receiver/Processo
r
■
9