User guide

Firmware Update

This setting performs the firmware update procedure by reading the firmware binary files

located in the “Firmware” directory of you device.

Never delete or rename this folder.

Provided that you have already copied to this directory the latest firmware files downloaded

from the official site of your vendor, press enter to start the process. From the menu, you can

verify the revision number of the installed version and the revision of the new release.

The firmware update procedure takes approximately 1 minute. Once completed, turn off your

device by removing the power supply. Wait a few seconds and connect the power supply

again. The new firmware is now saved and in use.

NOTE: NEVER TURN OFF MVISTO DURING THE FIRMWARE UPDATE PROCEDURE.

THIS MAY DAMAGE YOUR DEVICE. IF FOR ANY REASON (E.G. POWER SUPPLY

FAILURE DURING FIRMWARE UPDATE) THE PROCEDURE FAILS, YOU MAY NOT BE

ABLE TO OPERATE YOUR DEVICE. IN THIS CASE, YOUR DEVICE MAY BE REPLACED

WITH A FUNCTIONAL UNIT BY YOUR VENDOR.

To return to factory default settings press successively: INFO, 0, 1, 2, ENTER/PLAY

IVX(R) VOD

Your Mvisto supports the new DivX® Video-On-Demand (VOD) feature. With this feature,

you have the possibility to purchase or rent DivX VOD movies, downloaded from the internet,

and playback on your Mvisto DivX Certified device.

From the “DivX(R) VOD” option of the “Setting” menu you can see the registration code of

your device. This is a unique 8-digit code, assigned to each DivX certified device (like your

Mvisto).

Please refer to the sub-sequent paragraph entitled DivX® VOD Compatibility, for more

details on this feature of your device.

■