User manual

P7-3500 User Guide
2.2 USB Connection
The P7-3500 operates as a standard USB 2.0 mass storage device when connected to a
computer via USB. Use the included cable to connect your device to the computer system.
Note: Always connect the USB cable to your computer first, before you turn on the device.
If you connect the USB cable when the device is still connected to the TV set and in
playback mode, the playback will be stopped and the screen will go black. Once you
disconnect the USB cable, the media player will start up again and you can access the
files on the TV screen.
1. Make sure playback is stopped and the power is turned off.
2. Connect the USB cable to your computer.
3. Plug in the power supply if not already connected
4. Turn on the power using the power switch on the P7-3500
5. Wait for the system to mount the drive.
6. It will automatically show up on your desktop (Mac) or under My Computer (PC) as
external hard disk in which you then can copy any file(s) you want (music, movies,
pictures, and/or data).
7. When finished, close all open folders or applications that are still accessing the hard
drive and use the safe removal process to eject the drive.
8. Turn off the power and disconnect the USB cable.
9. Done, the device is now ready to be re-connected to the TV set.
Tip: It is recommended to empty the “Recycle Bin” after your file(s) deletions to free the
HDD space.
Note: You will always need the external power adapter when connected to the computer.
The hard drive can not run on USB bus-power alone!
Page 7 / Chapter 2 - System Setup