Instruction manual

51
6.10.1 E-mail Setup
In Network Setup, press ENTER to call up E-mail Setup as shown when the highlighted
option is E-mail.
The E-mail Setup allows the administrator to set e-mail related parameters. When an event
occurs and E-mail is enabled for the corresponding action, an e-mail will be sent based on the
parameters set here.
The general operations are as below:
 ▲▼
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to Network Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 SMTP Server – SMTP mail server name. Please follow the Text Input method described
in Section 4.1 to modify this item.
 Authentication – whether the SMTP mail server requires authentication. Press ENTER
to check/uncheck this item.
 Username – username if the SMTP mail server requires authentication. Please follow the
Text Input method described in Section 4.1 to modify this item.
 Password – password if the SMTP mail server requires authentication. Please follow the
Text Input method described in Section 4.1 to modify this item.
 Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails originated
from the triggered events. Please follow the Text Input method described in Section 4.1 to
modify this item.