User manual

ManualsBrandsMacpower ManualsHDD/SSD enclosuresMantaRay

If the system

doesn’t recognize

the drive, turn on

the power first,

before connecting

the USB/Firewire

cable.

Win98 does not

support Firewire,

you need to

upgrade your OS to

Win98SE or higher.

The MantaRay

800+ does not

support Win98/SE,

you need to

upgrade your OS to

WinME or higher.

For safe removal of

your drive and to

assure that no data

is lost, always

follow the unplug

procedure. If not, an

error message will

show up.

Installation on a PC (Microsoft Windows)

Win2000 or WinXP with a USB or Firewire connection:

• Turn on your Computer and start Windows

• Connect the MantaRay and turn it on

• Let Windows search and install the driver automatically

• Open “My Computer” to see your external hard drive **

Win98SE with a Firewire connection:

• Turn on your Computer and start Windows

• Connect the MantaRay and turn it on

• Let Windows search and install the driver automatically

• Open “My Computer” to see your external hard drive **

Win98/SE with a USB connection:

• Turn on your Computer and start Windows

• Insert the driver CD into your CD-ROM

• Connect the MantaRay and turn it on (in some cases the

driver must be installed before connecting the device, see

note on CD or readme file)

• Follow the onscreen instructions and install the drivers

• Open “My Computer” to see your external hard drive **

Unplug Procedure:

• Click on the taskbar icon for external hardware

• Choose your external hard drive and confirm to remove it

** For factory new drives and formatting, see “Partitioning &

Formatting”