User's Manual

choose one and then press OK to actually play the file. If you wish to cancel press ESC button.

( refer to File Play Setting of Running MyHD in Full Screen Mode)

FF/REW

: When playing a file, use remote control or number keys on keyboard to control Multiple FF/FF.

key board number keys

1(REW*1sec) 2(FF*1sec) 3(FF*2sec)

4(REW*2sec) 5(FF*4sec) 6(FF*sec)

For example if FF is set as 10 sec, pressing #5 will move the file to 40sec after.

MyHD supports capturing Transport Stream and stores the stream into a HDD to display images any time.

If audio is not working properly during capturing, DMA mode should be selected in a HDD.

For the perfect capture, we recommend the PC system that is Pentium III 800MHz or higher specifications.

During capturing, if size of a file exceed its set value(refer to Capture Mode Detail Options), the file creates a new file by adding

"_number" to original file name. ( ex, Capture.tp, Capture_01.tp, Capture_02.tp, and so on.

The captured files will be continuously played by order of numbers when they are replayed.

To storing Transport Stream, Transport Stream Capture must be selected from "Config Panel"/"Capture Setup"/"Capture Mode".

Capturing

ressing Capture button of control panel or Rec button of remote control will save a file to directory that is assigned by capture

directory.

The file name will be saved as assigned by capture detail option. (refer to Capture Settings) When "Add catured file to list" option

in File Play Setting is selected, captured file will be automatically added to file list.During capturing, capture time can be set by

pressing Capture button of control panel or Rec button of remote control. Each time you press the buttons, the time will be set in

order of 10min, 30min, 60min, 90min, 120min, 180min, infinite.

Press Stop button to stop the capturing.Also, press Play/Pause button to pause the capturing.

Press Play/Pause button to re-capture the file.Do the same for Full Screen Mode

While watching digital broadcast in HD mode, transport stream can be saved by pressing Rec button.

Transport Stream Capture after setting Capture time

To decide a capturing time, select Capture from the below pop-up menu.

1. Type a desired capturing time in the Capture time box.

2. If you type "0", the capturing will be executed as long as possible.

3. To stop the capture, use Stop button.

To execute Motion Video capture, select "Config Panel"/"Capture Setup"/"Motion Video Capture".