User's Manual

2. Remove the screw attached to the slot cover and remove the slot cover plate.
3. Before handling the MyHD card, ground yourself by touching the power supply box inside your computer
4. Position your card directly above the PCI slot and insert the card firmly into the slot. Care should be taken to press it evenly and snugly
into its slot.
5. Use the enclosed jumper cable to connect the audio output of
the MyHD card to the LINE IN,
AUX or CD input of your PC sound card or motherboard.
**If the audio output is set by the jumper cable in the MyHD
application program, you have to connect the jumper cable
between the MyHD card and a sound card. However, you do not
need to do it when the audio output is set by wave in the MyHD
application program.(Refer to Audio Configuration ).
6. Replace the cover on the computer.
7. Attach the antenna lead from your rooftop antenna or cable system to the antenna input of the MyHD card.