User's Manual

Macro Image Technology,inc 22
Step 6. Antenna/Cable Mode
Select either Antenna or Cable mode, depending on the type of incoming signal
you are using.
Procedure
• Select INPUT to choose either ANTENNA or Cable. Using Air/Cable button.
• Select ANTENNA either A or B using ANTENNA menu.
Step 7. Programming Available Channels
YOU MUST PERFORM THE AUTOMATIC CHANNEL PROGRAMMING
BEFORE MANUALLY ADDING AND DELETING CHANNELS BECAUSE OF
THE DIGITAL TUNING SYSTEM USED BY THE STB. THIS METHOD WILL
ENSURE THAT EVERY AVAILABLE CHANNEL IS CAPTURED AND
STORED INTO MEMORY.
Automatic Channel Programming
The STB will scan for all available channels and store them in memory. The
scan will normally take several minutes to complete.
Procedure
• In CHANNEL Menu, select AUTO SEARCH to automatically scan and store
all
channels with a signal. It takes sereral minutes.
Manual Channel Programming
After programming all available channels, you can use the MANUAL feature to
selectively add or delete channels.