Owner’s Manual www.macrom.it M2A.
Front/Rear view 2 1 15 3 16 4 5 17 6 7 8 9 10 11 12 13 14 19 20 21 22 18 1 2 3 4 5 6 7 8 9 23 24 25 26 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 Low Level Input (CH1/CH2) High Level Input (CH1/CH2 & CH3/CH4) Gain Control (CH1/CH2) High pass switch (CH1/CH2) High pass cutting adjustment Input Mode selector Output Mode selector Low pass cutting adjustment (CH3/CH4) Low pass switch (CH3/CH4) High pass cutting adjustment (CH3/CH4) High pass switch (CH3/CH4) Gain Control (CH3/
Input setting CH1/CH2 Low Level Input � � ���� ���� �In pu t (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifier. (FR) Relier par un câble RCA de bonne qualité les sorties RCA de l’autoradio aux entrées “Input” RCA de l’amplificateur. (IT) Collegare l’uscita Audio proveniente dall’autoradio, all’ingresso Low level dell’amplificatore. (D) Verbinden Sie den Audioausgang (RCA) des Autoradios mit dem RCA Eingang des Verstärkers.
5 6 7 8 9 Input setting CH3/CH4 10 11 12 13 14 15 16 18 19 ���� � � ���� � � � 17 � (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifier. �In pu Low Level Input t (FR) Relier par un câble RCA de bonne qualité les sorties RCA de l’autoradio aux entrées “Input” RCA de l’amplificateur. (IT) Collegare l’uscita Audio proveniente dall’autoradio, all’ingresso Low level dell’amplificatore.
Crossover setting CH1/CH2 1 2 3 (Eng) Select “FLAT” for a compleate frequency range. Flat switch 4 (FR) Choisir la position “Flat” pour déconnecter le filtre actif (Large Bande). 5 (IT) Selezionare “FLAT” per una completa risposta in frequenza. 6 (D) Wählen Sie “FLAT” für eine Übertragung des gesamten Frequenzbereichs. (SP) Seleccione “FLAT” para una gama de frecuencia del compleate. 7 8 9 ���� ����� 10 (Eng) Select “HIGH” for a high frequency range.
1 (IT) Selezionare “LOW” per la risposta delle frequenze basse. 2 1 3 2 4 3 5 4 6 5 7 6 8 7 9 8 10 9 11 10 12 11 13 12 14 13 15 14 16 15 17 16 18 17 19 18 (D) Wählen Sie “LOW” für eine Übertr. des Bass-Frequenzbereichs. 19 Crossover setting CH3/CH4 (Eng) Select “FLAT” for a compleate frequency range. (FR)Choisir la position “Flat” pour déconnecter le filtre actif (Large Bande). (IT) Selezionare “FLAT” per una completa risposta in frequenza. (D) Wählen Sie “FLAT” für eine Übertr. des ges.
Input/Output Mode setting ��� ������� 06
CH1/CH2 Speakers connection S pe ak e r � � ��� + � � ��� ���� ��������� - (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance minimale 2 ohm en stéréo, 4 ohm ponté. Suivre les illustrations pour les branchements. (IT) Minima Impedenza accettabile 2 ohm. Attenersi alle illustrazioni per i collegamenti (D) Minimale Anschlußimpedanz 2 Ohm. Beachten Sie die Abbildungen für die Anschlüsse. (SP) Impedancia aceptable mínima 2 ohmios.
CH3/CH4 Speakers connection S pe ak er � � ��� + � ��� � ���� ��������� - (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance minimale 2 ohm en stéréo, 4 ohm ponté. Suivre les illustrations pour les branchements. (IT) Minima Impedenza accettabile 2 ohm. Attenersi alle illustrazioni per i collegamenti (D) Minimale Anschlußimpedanz 2 Ohm. Beachten Sie die Abbildungen für die Anschlüsse. (SP) Impedancia aceptable mínima 2 ohmios.
Power connection ���������������� ������ + -� CAR CHASSIS CAR CHASSIS (Eng) Connect the Positive (+12V) directly to the Battery of the car. To make sure itself to insert a fuse of adequate amperage in order protect the system. Connect the Ground in to the car chassis, close as possible to the amplifier. (FR) Relier la borne +Battery de l’amplificateur directement à la borne +12V de la batterie du véhicule à l’aide d’un câble de section appropriée.
Features • • • • • • • • • • • Four channel power amplifier 90 x4 watts into 2 ohms load 60 x2 watts into 4 ohms load TO3P transistor on amplifier stage Variable Low-High-Band pass x-over at18/12dB/oct on rear section Variable High pass x-over at 12dB/oct on front section In/Out mode selector (2/4 ch In)(ST/Dual mono Out) Adjustable x-over from 30Hz to 600Hz High level Input (booster In) Mos-Fet power supply Screws terminals connectors Technical data RMS Power at 4 ohm Stereo load at 14,4 volts RMS Power at